Your IP address is: 34.200.222.93

Haversine Forums -> AirTrack - General Issues and Support

Problem With P3D Plugin

Posted on January 21, 2018 18:55 by CAA001

Using Prepar3d version 4.1,

1) The flight plan is not read correctly by AirTrack.
2) You can set the transponder with AirTrack but any subsequent change on the Com page will zero out the transponder code.

I'm guessing these are plug-in problems. Will there be an update for P3D version 4?

Thanks,
Tom

Posted on January 21, 2018 20:11 by skyfox

The flight plan was a known issue but didn't know about the transponder.

I'll try and see if they can be fixed in a new version of the plugin and update here as soon as possible,

thanks for reporting,
joao @ haversine

Posted on February 13, 2018 19:18 by CAA001

Any news on the update to the windows plugin for P3D V4?

Posted on March 28, 2018 17:56 by CAA001

Any news on the update to the windows plugin for P3D V4+?

Posted on April 10, 2018 09:23 by skyfox

Sorry, no news yet :(

I had a look at the code but couldn't find anything that suggested the problem.

The plugin and code were written by another developer in a windows environment and I'm also not very familiar with it or the code, so it makes plugin updates difficult. I'll try but can't promise if or when :(

Sorry for the delay,
joao @ haversine

Posted on August 20, 2018 17:10 by polymerman

Hi Joao,

Any fix for the transponder and flight plan issues?

Plugin can get give and get feed back from aircraft but these two issues still aren't working.

Could the plugin be looking in the wrong location for the P3d4.1 flight plans instead of user documents
"Prepar3D v4 Files" folder?

Kind regards.

Posted on August 31, 2018 11:42 by skyfox

Afraid not :( I'm currently away with limited access to the Internet and the P3D plugin has its own issues. I'll try to look at it but can't promise when or if I'll be successful as the plugin is old code of which I know little.

joao @ haversine

Posted on August 31, 2018 17:42 by polymerman

Thanks for the reply and any assistance to make it work would be fantastic!
Take care.

Posted on January 2, 2019 17:37 by Guillj

Hi,

First of all, happy new year!

I also have the same problem. By the past I used FSX without any problems but since may 2018 I'm using P3D now V4.4.

The problems are the FMC flight plane with not correct points so impossible to have the correct line of the travel and the distance, the remaining time. And the second one is as soon as I change one frequency, the transpondeur number go back to 0000.

Sorry for my english it's not my language.

When do you think solve this please ? I love to used your product on my Ipads.

Thanks
Guillj

Note: You need to be logged in to post in the forums.

© 2020 Haversine Ltd